Lumex
Lumex
Lumex is the lightest, thinnest fabric in the collection and the strongest. 195 g/m², 0.23 mm, and 921 N breaking strength along the roll against 984 N across it — more in the length direction than any other fabric we stock, including two that weigh 260 g/m².
If you have been buying soft signage on grams per square metre, that row is the argument against it. Weight is a proxy for strength and a poor one; the structure is what carries the load.
At 52 % light shading it sits mid-range on opacity, and the thinness makes it the easiest fabric here to seat into a tight silicone-edge groove. It takes dye-sublimation direct and transfer, and silk-screen.
The honest caveat is shrinkage. Lumex is held to a 3 % tolerance rather than the 2 % the rest of the range works to, and it measures 2.7 % length and 2.3 % width. Both are on spec. But on a 3 m panel that is about 81 mm off the calender, against 27 mm for our most stable fabric, and a looser band means more variation lot to lot. Build the compensation per lot rather than once, and it behaves.
Ask us for test yardage and run a grid test on your own line.
At a glance
Ideal for
Where this one goes
-
Indoor Backlit -
Beauty & Retail -
Booth Systems -
Interior Décor -
Retail Signage
Why it is built this way
Lightest in the line
195 g/m² at 0.23 mm — less mass on the frame and less freight per roll.
Wide transfer window
180–205 °C is the most forgiving press window of the six.
Measured, not claimed
How far past the standard
Every figure below is an independent test result set against the published minimum for its method. Longer bar, bigger margin.
- +10% over spec
- +13% over spec
- +84% over spec
- +97% over spec
- +140% over spec
- +50% over spec
- +36% over spec
- 26% UNDER under limit
- 10% UNDER under limit
- 23% UNDER under limit
On spec Finished Material Weight · Width · Thickness · Stretch · Light Shading
All data are average test results provided as a guide only and should not be used for warranty purposes. Buyers should independently test and determine product suitability.
Technical data
Every number, grouped
Physical
| Property | Method | Standard | Result | vs. standard |
|---|---|---|---|---|
| Finished Material Weight | ASTM D-3776 | 200 g/m² (±5 g) | 195 g/m² | On spec |
| Width | ASTM D751-2006 | 320 cm (±1 cm) | 320 cm | On spec |
| Thickness | ASTM D-1777 | 0.28 mm (±0.05 mm) | 0.23 mm | On spec |
| Stretch | ASTM D 2594 | 1.6 % (±1 %) / 2.2 % (±1 %) | L 2.0 % · W 2.2 % | On spec |
Mechanical
| Property | Method | Standard | Result | vs. standard |
|---|---|---|---|---|
| Elongation at Break | ISO 13934.1-2013 | > 30 % / > 30 % | L 33 % · W 34 % | +10% / +13% |
| Breaking Strength | ISO 13934.1-2013 | > 500 N / > 500 N | L 921 N · W 984 N | +84% / +97% |
| Tearing Strength | ISO 13937.2-2000 | > 10 N / > 10 N | L 24 N · W 15 N | +140% / +50% |
| Bursting Strength | ASTM D3787-2007(2011) | > 1000 N | 1362 N | +36% |
Optical
| Property | Method | Standard | Result | vs. standard |
|---|---|---|---|---|
| Yellowing | ISO 13655-2009 | ΔE < 2.5 | ΔE 1.84 | 26% UNDER |
| Light Shading | FZ/T62025-2015 | 50 % (±5 %) | 52 % | On spec |
Thermal
| Property | Method | Standard | Result | vs. standard |
|---|---|---|---|---|
| Shrinkage | — | < 3 % / < 3 % | L 2.7 % · W 2.3 % | 10% UNDER / 23% UNDER |
| Transfer Temperature | — | 180–205°C, 0.65–2 min | — | — |
Data source: Epic spec sheet v23 (2026-10-06)
Will it run on your machine?
Ink & printer compatibility
| Process | Supported | Verified machines |
|---|---|---|
| Dye sublimation — direct | ✓ Yes | Roland · Mimaki · Epson · Dgen · Mutoh |
| Dye sublimation — transfer | ✓ Yes | Mutoh · Mimaki · Epson · Dgen |
| Silk-screen | ✓ Yes | Standard equipment for this process |
| UV | — | Not recommended |
| Latex | — | Not recommended |
| Solvent / eco-solvent | — | Not recommended |
Same job, different number
Closest on the numbers
Lumex is 195 g/m². These are the nearest fabrics to it by basis weight out of the 6 in The Epic Performance Textile Collection that publish one.
- Thickness
- not published
- Stock width
- 320 cm
- Light shading
- not published
- Thickness
- 0.22 mm
- Stock width
- 320 cm
- Light shading
- 41.0 %
- Thickness
- 0.55 mm
- Stock width
- 320 cm
- Light shading
- 60.0 %
Nearest by basis weight only. Weight is not quality — a lighter fabric is the right answer for a tension frame and the wrong one for a hanging banner. The figures beside it are there so the choice is made on the property the job actually cares about.
What it is for
From the floor
What printers found
Nobody has reviewed this one yet.
Worth saying plainly rather than hiding the section. In the meantime every figure on this page is measured, published with its test method beside it, and is the thing we would rather be judged on.
See how the figures are measuredBefore you quote it
Questions about this fabric
Will it run on my press?
The print routes this fabric takes are listed above. If the one you own is not there, Rio takes UV, latex and eco-solvent and is the fabric in this collection to look at instead.
How much does it move under heat?
Transfer temperature and the measured shrinkage are in the technical table on this page, with the test method beside each figure. That is the number that decides whether the finished panel fits the frame.
What does this cost?
The figure on this page is a list reference. Roll goods are quoted against width, volume and freight, so add it to a quote request and a person will come back with the real number.
Can I try it first?
Ask for test yardage. Your press, your ink, your RIP — it answers what a data sheet cannot.
A figure is missing. Why?
Because it has not been measured yet, and we would rather say so than publish something plausible. Rows with no number say where they stand.
How it ships
Packaging options
Individually bagged, 3" core
Each roll bagged on a 3-inch core and packed in a woven outer bag. The default for standard widths.
Hard tube with caps
Rolled into a rigid tube with end caps. Specify at order for long-haul freight or wide goods.